P3 International GSE3226STG, General Instruction Manual

Page: 9 / 64

9
ENGLISH
!
FUNCTIONAL DESCRIPTION
WARNING: Read, understand, and follow all instructions and warnings on the
machine and in this manual before operating.
Auger Control
The auger control is located on the left handle. Squeeze the auger control to engage the augers. Release to
stop the snow throwing action. (Drive control must also be released.) See Figure 6
IMPORTANT : Refer to Auger Control Test prior to operating your snow thrower. Read and follow all
instructions carefully and perform all adjustments to verify your snow thrower is operating safely and properly.
Chute Tilt Control
The distance snow is thrown can be changed by adjusting the angle of the upper chute. Move the chute tilt
control forward to decrease the distance, and backwards to increase distance. See Figure 6.
Skid Shoe
The space between the shave plate and the ground can be adjusted by positioning the skid shoes. Refer to
Skid Shoe Adjustment
Shift Lever
The shift lever is located in the center of the handle panel and is used to determine both ground speed and
direction of travel. It can be moved into any of eight positions. See Figure
.6
Forward
Your snow thrower has six forward (F) speeds, with position number one (1) being the slowest speed. See.
Fig.6
Reverse
Your snow thrower has two reverse( R) speeds, with position number one(1) being the slowest speed. See
Fig.6
Important:
Always release drive control before changing speeds.
!
IMPORTANT
:
Always release drive control before changing speeds.
Drive Control
The drive control is located on the right handle. Squeeze the drive control to engage the wheel drive. Release
to stop. See Figure 6