P3 International GSE3226STG, General Instruction Manual

Page: 63 / 64

4. Remove the spark plug and empty a little engine oil (about 30 ml) in the hole. Crank the engine a
couple of times. Reinstall spark plug.
When the engine will not be use for long time, prepare it for storage with the following steps.
Fasten engine during transportation to reduce the possibility of fuel leak.
2. Start the engine and let it run until it stops due to lack of fuel.
3. Change engine oil if it will be stored longer than 3 months.
7. Inspect engine for damage and repair it if necessary.
Allow engine to cool before transportation or storage.
20
6. Lubricate all the parts outside if necessary.
9. Store the machine indoors if possible.
8. Rust protection to the metal surfaces.
8. Storage & Transportation
5. Clean the whole engine thoroughly.
1. Empty fuel tank.