15
6. OPERATION
7.0
Only operate the water pump outdoors in a well ventilated area.
7.1
Never operate the pump indoors or in a confined space.
7.2
Be aware of building openings and ventilation systems where the exhaust may enter
during operation.
7.3
Keep at least 2 meters of clearance on all sides of the water pump including overhead.
7.4
Always place the water pump on flat level ground to avoid tipping during operation.
7.5
Always use the strainer on the suction pipe.
7.6
Suspend the strainer if there is any sand or mud present at the bottom of the water.
7.7
Pump output will be affected by the type, length and size of the suction and discharge
hoses.
Suction head is the distance (A) from the water intake to the suction port.
The pumping height, total head, is the distance (B) from the water intake to the point
of discharge.
As total head increases, the pump output decreases.
The discharge capacity is greater than the suction capacity. Therefore, it is important to
keep the suction head less than the total head.
The time required to draw the water from the source to the pump (self-priming time)
can be decreased by minimising the suction head.
CAUTION
ALWAYS check the oil and fuel level BEFORE operation.
Ensure you have read and understood this manual before operation.
7. OPERATING
