14
6. STOPPING PROCEDURE
5.8
DO NOT let the recoil handle snap back against the housing, return it slowly.
5.9
Once the engine starts, slowly move the choke lever to the OPEN position as the
engine warms up.
5.10
If the engine begins to struggle, move the choke lever back to the CLOSED position
and slowly move it back to the OPEN position. 4.11
Once the engine has warmed
up, moved the throttle lever to the desired engine speed.
6.0
Move the throttle lever from fast to slow and allow the water pump to run at idle under
no load for 30 seconds.
6.1
Turn the engine switch to the OFF position.
6.2
Move the fuel valve lever to the OFF position.
6.3
Allow the engine to completely cool before storing or moving.
6.4
After cooling, remove the priming plug (A) and priming drain plug (B) and allow it to
drain thoroughly.
