Section 1 - TireView
™
TPMS Instruction Manual
Figure 14: High Pressure Set Screen
5.
Press the
GO
button to scroll/cycle to the next axle.
Note:
At the trailer section of the display, all the tires will flash. All the trailer axle high pressures can now
be set as one group.
6.
Do steps 2-5 for the remaining axles.
7.
Press the
SET
button to save the settings and return to the mode menu.
8.
Press the
BACK
button to go to the main screen.
Setting the Displayed Temperature Units
1.
Press and hold the
SET
button until a beep is heard from the display.
2.
Press the
+
button four times.
SET
will show at the bottom of the screen and
°F/°C
will be blinking. See
Figure 15: Temperature Units Screen
3.
Press the
SET
button again.
4.
Press the
+
button to select
°F
or
°C
.
5.
Press the
SET
button again to save the selection.
6.
Press the
BACK
to return to the main screen.
Setting the High Temperature Alarm
Note:
It is recommended that the default temperature setting of 158 °F (70 °C) be used for all types of tires.
1.
Press and hold the
SET
button until a beep is heard from the display.
2.
Press the
+
button two times.
HI TEMP SET
will show on the display. See
.
© Pressure Systems International Inc.
All rights reserved worldwide.
25
T004-01 Rev 06-19