www.pmlighting.com
INSTALLATION INSTRUCTIONS
pg. 4
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY
TO PERSONS IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION GUIDELINES
Save these instructions!
For use with Low Voltage Landscape Lighting Power Units. FOR OUTDOOR USE ONLY.
Amperage not to exceed 25 AMPS per circuit
Voltage not to exceed 15 VOLTS per circuit
Warning:
Luminaire must be installed in accordance with the National Electric Code (NEC) and all Local Codes. Failure
to comply with NEC and/or Local Codes may cause serious injury and could destroy the luminaire. Failure to comply
with NEC and Local Codes will void all warranties.
Safety Warning:
LAMP IS HOT WHEN LUMINAIRE IS ON! Hot lamp creates risk of fire and injury to persons. Keep away
from combustibles. Lamp gets hot very quickly. Turn off or unplug luminaire and allow lamp to cool to change bulb.
Do not touch lamp with bare hands. When using this fixture with high wattage halogen lamps (35W halogen
MAXIMUM), keep luminaire away from children as luminaire may become VERY HOT. Do not install luminaire within
10 feet (3.05 meters) of a pool, spa, fountain, or pond. Do not cover or bury luminaire and keep luminaire clear of
debris. Use only UL compliant components including low-voltage power units, cable, wire connectors, and any other
component necessary.
CAUTION: Luminaire is NOT submersible!
NOTE: Do not exceed the maximum wattage rating or maximum amperage rating of the power unit (transformer)
used when installing multiple luminairies.
1.
Disconnect or unplug transformer from power source.
2.
All Path Light tops are to be mounted to a power stake and
are interchangeable.
3.
Drive the power stake into the ground at the desired location
and depth (see “B”) with the included installation driver tool.
4.
Install bulb, slide top over power stake, and set top at the
desired height position using set screw or pushpin in holes.
5.
Connect the wire terminals to the main lead to the transformer
using included Quick Connect lead connectors.
6.
Cable may be buried if desired to a maximum depth of 6
inches underground.
7.
Do not exceed 12 Volts at the Luminaire.
8.
Recommended Lamp: 3W G4 LED Bi-pin
Professional
Series
CS936-LED Path Lights
