17
MAN 9042764 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK6600 Vejen
e-mail: [email protected]
Slide support:
Finally mount the slide support on the tilting table.
Slide support
Connection to power supply
WARNING! High voltage
Only use the machine with a power source that meets the following
requirements (see also the section: Technical specifications):
-
Electrical sockets must be installed correctly, have an earth connection and be tested.
-
Voltage and frequency must match the data that is listed on the actual machine.
-
There must be a connected RCD with a residual current sensitivity of 30 mA.
Note:
Always contact an authorised electrician if you are in any doubt about how
your mains network meets the above requirements.
