![background image](http://html2.mh-extra.com/html/p-lindberg/gs650/gs650_original-manual_3085790087.webp)
16
MAN 9062629 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Maintenance
Regular maintenance is required to ensure the equipment’s best performance and
long service life.
WARNING –
Before any type of maintenance or inspection is carried out, stop
the engine and wait five minutes until all parts have cooled off. Disconnect the spark
plug cable and keep it away from the spark plug.
Maintenance plan
Maintenance tasks and checks
Frequency
Check for loose and missing screws, nuts, bolts. Before each use
Check for damage on all machine parts
Before each use
Check fuel level
Before each use
Check fuel tank for leaks
Before each use
Clean the machine
Before each use
Check the oil level
Before each use
Change motor oil
After the first five operating hours then
after every 25 operating hours.
Check the safety switch function
Before each use
Check V-belt tension
Before each use
Check blade sharpness
Before each use
Lubricate the blade rotor
Every 25 operating hours
Clean the spark plug
Every 25 operating hours
Clean the engine’s exterior and radiator
Every 25 operating hours
Check the tyre pressure
Every 25 operating hours
Clean the air filter
Every 20–25 operating hours
Cleaning the air filter
A blocked air filter reduces the engine’s performance significantly and leads to faulty
motor function. It also reduces the lifetime of the engine!
Remove the air filter cover. Remove the air filter. Clean the air filter. And drip some
drops of oil onto the filter. Replace the filter.
Clean the spark plug
Remove the spark plug terminal from the spark plug. Loosen and remove the spark
plug. Remove carbon and deposits using a small brush. The electrode gap must be
approximately 0.5–0.7 mm.