![background image](http://html2.mh-extra.com/html/p-lindberg/gs650/gs650_original-manual_3085790082.webp)
11
MAN 9062629 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Guide the wheel axle through the bracket
and remount the wheel.
Secure the wheel using a spacer and the
wheel pin.
And secure the axle with two bolts.
Feed chute:
Position the chute on the blade box so that
the assembly holes align with the holes in
the chute. Fit the bolts, washers and nuts.
Caution: Risk of cutting injuries!
The machine can now be laid down so it rests on the chute. If possible, place a piece of
cardboard under the chute to avoid scratching the paint.
Slightly tip the blade box back and fit the
support foot using M10 x 35 bolts, washers
and M10 nuts.
Ensure that it is correctly positioned.
See the rubber support.