![background image](http://html2.mh-extra.com/html/p-lindberg/gs650/gs650_original-manual_3085790085.webp)
14
MAN 9062629 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
User Instructions
WARNING
A.
Read and understand all instructions, safety related rules and warnings in the sections
below before putting the equipment into operation. If there is any doubt or question
about the correct or safe use of the equipment described in this manual, contact the
supplier.
B.
When the woodchipper is running, ensure that you stand in the safe work zone at all
times. Never place any part of your body anywhere where it could cause unsafe
operation.
C.
Before filling and starting the woodchipper, it is advisable to put on personal protective
equipment, including safety glasses, ear defenders, tight-fitting gloves without
ties/laces or loose-fitting cuffs and shoes with steel caps.
D.
Ensure that you are familiar with the correct and incorrect wood chipping methods.
Never use an incorrect or unsafe method.
Start
1.
Place the woodchipper on an even, dry surface and chock the wheels so the machine
cannot move.
2.
Ensure that the fuel cock is in the “ON” position.
3.
Engage the choke if the engine is cold.
4.
Set the throttle to “FAST” (the position furthest to the left).
5.
Put the on switch to “ON”. Grip the recoil starter handle and pull it slowly until you feel
resistance. Let the cord recoil slightly and pull quickly and firmly to start the engine. It
will typically take one or two attempts to start.
6.
If you engaged the choke, slowly disengage it when the engine is running satisfactorily.
7.
If the engine is cold, it can be warmed up at half throttle (the middle position) for 3- 4
minutes, after this apply full throttle.
Stop
1.
Set the throttle to idle (the position furthest to the right).
2.
Put the on/off switch to “OFF”.