17
MAN 9058167 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK-6600 Vejen
e-mail: [email protected]
Filling the gun and hose
1.
Hold the spray gun against the waste container. Aim the gun into the container.
a)
Disengage the locking pin.
b)
Pull the trigger and hold it.
c)
Turn the Prime/Spray valve horizontally to the SPRAY position.
d)
Set the ON/OFF switch to ON.
2.
Release the spray gun into the waste container until only paint comes out of the gun.
3.
Release the trigger and lock it.
4.
Move the return hose to the paint bucket and clip it to the suction hose.
Note: When the motor stops, the painter sprayer is ready to paint. If the motor
continues to run, the equipment is not properly prepared. Repeat the procedure
for Filling the pump and Filling the gun and hose.
