DRAWN
CHECKED
ENG APPR
MGR APPR
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
ANGLES ±X.X°
2 PL ±X.XX 3 PL ±X.XXX
NAME
Peter Stanley
DATE
09/22/16
Solid Edge
TITLE
NXT_LP-1000W_Alpha_WithLamp
SIZE
A1
DWG NO
0001
REV
FILE NAME: NXT_LP-1000W_Alpha_WithLamp_Bottom.dft
SCALE:
WEIGHT:
SHEET 1 OF 1
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
600
660
750
825
1000
1150
DRAWN
CHECKED
ENG APPR
MGR APPR
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
ANGLES ±X.X°
2 PL ±X.XX 3 PL ±X.XXX
NAME
Peter Stanley
DATE
09/22/16
Solid Edge
TITLE
NXT_LP-1000W_Alpha_WithLamp
SIZE
A1
DWG NO
0001
REV
FILE NAME: NXT_LP-1000W_Alpha_WithLamp_Bottom.dft
SCALE:
WEIGHT:
SHEET 1 OF 1
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
600
660
750
825
1000
1150
DRAWN
CHECKED
ENG APPR
MGR APPR
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
ANGLES ±X.X°
2 PL ±X.XX 3 PL ±X.XXX
NAME
Peter Stanley
DATE
09/22/16
Solid Edge
TITLE
NXT_LP-1000W_Alpha_WithLamp
SIZE
A1
DWG NO
0001
REV
FILE NAME: NXT_LP-1000W_Alpha_WithLamp_Bottom.dft
SCALE:
WEIGHT:
SHEET 1 OF 1
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
600
660
750
825
1000
1150
10.1. Placement and Replacement of the Lamp
• Switch off main power source.
• Hold the lamp with a fabric glove to prevent it from falling. Use a protective
glove if the lamp is damaged.
• Open the lamp holders by sliding the plastic locks outwards (7).
• Carefully take the old lamp out of the fixture (8).
• Install the new lamp with the getter (A) near the ballast (9)
• Use a fabric glove to carefully press the lamp in the fitting until the metal
springs hold the lamp.
• Using index finger, apply pressure on the bottom of the rear, center portion of
lamp holder(10)—moving the sliding mechanism towards the lamp until front
edge aligns with lamp lock indicators (B) on reflector bracket. Repeat on other
side. Ensure sliding mechanisms have fully closed against the stops, as loose
connections may cause arcing—potentially creating a fire risk and/or voiding
warranties.
• Switch on main power source.
fig(7)
Note:
The lamp must be replaced approximately every 10,000 burning hours.
Caution!
Always wear cotton gloves when touching a lamp to avoid creating a
dark spot on the bulb from the oils on your skin.
Caution!
Only use lamps specified by P.L. Light Systems (see paragraph 3.2).
600W/1000W DE
f
f
fig(8)
m
fig(10)
f
f
fig(9)
getter
DRAWN
CHECKED
ENG APPR
MGR APPR
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
ANGLES ±X.X°
2 PL ±X.XX 3 PL ±X.XXX
NAME
Peter Stanley
DATE
08/04/16
Solid Edge
TITLE
NXT_LP-Alpha_Profile_Eye-Hook
SIZE
A1
DWG NO
0001
REV
FILE NAME: NXT LP side view eye bolt Alpha.dft
SCALE:
WEIGHT:
SHEET 1 OF 1
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
(A)
m
lamp lock indicator
(B)
Summary of Contents for NXT-LP 600W
Page 1: ...NXT LP 600W 1000W INSTRUCTION MANUAL...
Page 2: ......
