P.I.T. PHP170-C, Operation Manual

Page: 7 / 32

High Pressure Cleaner
6
when pressurized water is required to re-
move dirt.
Intended use
– With the use of appropriate auxiliary devic-
es, it is possible to apply detergent foam,
sandblasting and washing by rotating
brushes attached to the hydraulic gun.
– The performance and ease of operation
of the device are designed for non-profes-
sional use.
Assembly instructions
After opening the carton, please remove all
parts and check them against the following list
of components that are included:
A. High Pressure Hose Hook
B. Gun Holder
C. Switch
D. Cleaning pin
E. High Pressure Hose
F. Water inlet connector
G. Gun
H. Adjustable Nozzle
Technical data
Model PHP170-C
Mains voltage 220 V
Mains frequency 50 Hz
Power input 2200 W
Max. pressure 170 bar
Rated fl ow 450 l/h
Max. water
temperature
50°C
Weight 8 kg
Contents of delivery
High pressure hose 1 pc
Water inlet connector 1 pc
Cleaning pin 1 pc
Gun 1 pc
Adjustable nozzle 1 pc
Instruction manual 1 pc
note
Since the product is constantly being im-
proved, P.I.T. reserves the right to make
changes to the specifications and product
specifi cations specifi ed here without prior no-
tice.
Step 1
Install gun hook,gun holder tight to the main
body as below fi g.
can be dangerous.
– Remove the plug from the socket-outlet
during cleaning or maintenance and when
replacing parts or converting the machine
to another function.
Proper use of the pressure clean-
er
This unit is intended for use with cold wa-
ter only! Do not use hot water in this pres-
sure cleaner.
–
Operate the pressure cleaner at no more
than the fl uid pressure rated for the pres-
sure cleaner.
– Never run the pressure cleaner without a
water supply.
–
Running the unit without a water supply
will cause irreparable damage to the unit.
– Make sure that the water supply you use
for the pressure cleaner is not dirty,sandy,
and does not hold any corrosive chemical
products.
– Using a dirty water supply will compromise
the long life of the pressure cleaner.
– CAUTION! The pressure cleaner can be
used for a variety of applications including
washing cars,boats,patios,decks,garages
etc.where high pressure is necessary to
remove dirt and debris.
– High-pressure water flow can damage
the work surface if not used properly!
See the section titled
“Operating Instruc-
tions” for more details.Always test the
spray in an open area fi rst.
– Never move the unit by pulling on the high
pressure hose.Use the handle provided on
the top of the unit.
– Always hold the high pressure gun and
wand with two hands.Keep one hand on
the gun/trigger,while supporting the wand
with the other hand.
–
When dispensing detergent,the pressure
cleaner applies detergent to the cleaning
area at low pressure only.Once the deter-
gent has been applied,spray the detergent
off of the work area by using the adjustable
nozzle.
Product and service description
Read all safety instructions and instruc-
tions.
Failure to follow the safety instructions and
instructions may result in electric shock, fire
and serious injury.
Please observe the illustrations at the begin-
ning of the instruction manual.
– The device can be used for outdoor work