P.I.T. PHP170-C, Operation Manual

Page: 13 / 32

High Pressure Cleaner
12
Maintenance and service
Maintenance and cleaning
► Before any work on the machine itself
(e. g. maintenance, tool change, etc.) as
well as during transport and storage,
remove the battery from the power tool.
There is danger of injury when unintention-
ally actuating the On/Off switch.
► For safe and proper working, always
keep the machine and ventilation slots
clean.
When the battery is no longer operative,
please refer to an authorized after-sales ser-
vice agent for P.I.T. power tools.
Dispose of waste
Damaged power tools, batteries, acces-
sories and waste packaging materials
must be recycled and reused in an envi-
ronmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The fi rst 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-
ment that confi rms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certifi cates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod-
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is 12
months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.
2. The wear degree on the diameter of the
motor rotor commutator is less than 0.4 mm
(except for brushless motor tools), and the
internal damage caused by the quality of the
tool belongs to the warranty.
The following situations occur during the
warranty period, which is not covered by the
warranty:
1. In the absence of any valid legal docu-
ments (invoices) such as warranty certifi cates
and warranty cards to prove the date of pur-
chase.
2. Damage caused by natural wear and over-
load. (For example, motor rotor and stator fail-
ure caused by overload, scorching or melting
of the primary winding of the welding machine
transformer, charging or starting the charging
device, melting of internal parts, burning of
electronic circuit boards, etc.)
3. The casing and power cord are mechani-
cally damaged, as well as damage caused by
corrosive media and high and low tempera-
ture, foreign objects entering the ventilation
network of the motor, and damage caused by
improper storage (corrosion of metal parts);
4. Damage caused by improper carrying,
transportation and storage by users.
5. Products that are opened, repaired, re-
placed or modifi ed by users themselves.
6. Any damage caused by indiscriminate use,
beyond the scope of use of the tool, and not
in accordance with the instructions for use
and maintenance. (see chapter “Safety Pre-
cautions” in the manual);
7. The damage caused by the following situ-
ations is not guaranteed due to improper use
and non-quality problems:
(1) When the power tool is running at high
speed, use the braking device to forcibly stop
the rotation.
(2) Excessive pressure is applied to the tool
during the use of the tool.
(3) Use the tool outside the scope of its pur-
pose and capabilities.
(4) Damage caused by the tool working in
a dusty environment for a long time without
timely maintenance of the tool.
(5) Change the rotation direction of the work
head before the tool stops completely.
(6) Shock the battery or charger and replace
the plug of the charger without permission,
causing damage to the battery or charger.