P.I.T. E-PSR18-D4-A1, Operation Manual

Page: 6 / 10

Cordless Impact Drill
5
objects such as nails or screwdrivers
or by force applied externally.
An inter-
nal short circuit can occur and the battery
can burn, smoke, explode or overheat.
► T h e b a t t e r y i s s u p p l i e d p a r t i a l l y
charged. To ensure full battery capaci-
ty, completely charge the battery in the
battery charger before using for the
fi rst time.
► Read the operating instructions of the
battery charger.
► Adjust the gear switch only when the
machine is at a complete stop.
► Always push the gear selector and turn
the operating mode selector switch
through to the stop.
Otherwise, the ma-
chine can become damaged.
Product Description and Specifi-
cations
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may result
in electric shock, fi re and/or serious injury.
Intended Use
The machine is intended for driving in and
loosening screws as well as for drilling in
wood, metal, ceramics and plastic. The ma-
chines are additionally intended for impact
drilling in bricks, brickwork and masonry.
The light of this power tool is intended to illu-
minate the power tool’s direct area of working
operation and is not suitable for household
room illumination.
Technical Data
Model E-PSR18-D6
7PMUBHF
DC 20V
Chuck size 0.8-10 mm (3/8")
Speed 0-450/1450 r/min
Maximum torque 40 N·m (354 in-lbf)
Weight 2.2 Kg
Note
In text and numbers, may technical errors and
mistakes be made chat rooms. As the product
is constantly being improved, P.I.T. reserves
the right to make changes to the specifica-
tions and equipment of the product specifi ed
here without prior notice.
Product Features
The numbering of the product features refers
to the illustration of the machine on the graph-
ics page.
(1) Tool holder
(2) Keyless chuck
(3) Torque presetting ring
(4) Mode selector switch
(5) Gear selector
(6) Battery pack
(7) Battery unlocking button
(8) Worklight
(9) On/Off switch
(10) Rotational direction switch
(11) Handle (insulated gripping surface)
Contents of delivery
Cordless Drill 1 pc
Lithium Battery 1 pc
Charger 1 pc
Adapter 1 pc
10pcs Masonry Drill Bits 1 set
13pcs Hss Hex Shank Drill Bit Set 1 set
Instruction Manual
1 pc
Assembly
Battery Charging
Note:
The battery supplied is partially
charged. To ensure full capacity of the battery,
completely charge the battery in the battery
charger before using your power tool for the
fi rst time.
The lithium ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage
the battery.
The lithium-ion battery is protected against
deep discharging. When the battery is empty,
the machine is switched off by means of a
protective circuit: The inserted tool no longer
rotates.
► Do not continue to press the On/Off
switch after the machine has been au-
tomatically switched off .
The battery can
be damaged.
Removing the battery
The battery is equipped with two locking lev-
els that should prevent the battery from falling
out when pushing the battery unlocking but-
ton unintentionally. As long as the battery is
inserted in the power tool, it is held in position
by means of a spring.
To remove the battery, press the unlocking
button and pull out the battery toward the
front.
Do not exert any force.
Changing the Tool (see fi gure A)
► Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
during transport and storage, remove the