P.I.T. E-PSR18-D4-A1, Operation Manual

Page: 8 / 10

Cordless Impact Drill
7
fl ashing LED on the power tool.
To
restart the machine, release the On/Off
switch and then actuate again.
► Rapid shut-off can trigger only when
the power tool is running at maximum
operating speed and can rotate freely
around the drill bit axis.
Choose a suit-
able work position for this. Otherwise, rap-
id shut-off will not be ensured.
Working Advice
► Apply the power tool to the screw only
when it is switched off .
Rotating tool in-
serts can slip off .
An auxiliary tool can be used to remove the
screwdriver bit or universal bit holder.
Belt Clip
With the belt clip, the machine can be hung
onto a belt. The user has both hands free and
the machine is always at hand.
Maintenance and Service
Maintenance and Cleaning
► Before any work on the machine itself
(e. g. maintenance, tool change, etc.) as
well as during transport and storage,
remove the battery from the power tool.
There is danger of injury when unintention-
ally actuating the On/Off switch.
► For safe and proper working, always
keep the machine and ventilation slots
clean.
When the battery is no longer operative,
please refer to an authorized after-sales ser-
vice agent for P.I.T. power tools.
Dispose of waste
Damaged power tools, batteries, ac-
cessories and waste packaging materi-
als must be recycled and reused in an
environmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The fi rst 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-
ment that confi rms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certifi cates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod-
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is 12
months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.
2. The wear degree on the diameter of the
motor rotor commutator is less than 0.4 mm
(except for brushless motor tools), and the
internal damage caused by the quality of the
tool belongs to the warranty.
The following situations occur during the
warranty period, which is not covered by the
warranty:
1. In the absence of any valid legal docu-
ments (invoices) such as warranty certifi cates
and warranty cards to prove the date of pur-
chase.
2. Damage caused by natural wear and over-
load. (For example, motor rotor and stator fail-
ure caused by overload, scorching or melting
of the primary winding of the welding machine
transformer, charging or starting the charging
device, melting of internal parts, burning of
electronic circuit boards, etc.)
3. The casing and power cord are mechani-
cally damaged, as well as damage caused by
corrosive media and high and low tempera-
ture, foreign objects entering the ventilation
network of the motor, and damage caused by
improper storage (corrosion of metal parts);
4. Damage caused by improper carrying,
transportation and storage by users.
5. Products that are opened, repaired, re-
placed or modifi ed by users themselves.
6. Any damage caused by indiscriminate use,
beyond the scope of use of the tool, and not
in accordance with the instructions for use