P.A. SRH10K-24, Manual

Page: 8 / 23

F o r m X X X X : R e v i s e d 2 0 1 8 Page 8
Screw Version

Do not over tighten the mandrel.

Verify the direction of expansion in the mandrel before turning the handle to prevent over tightening,

Observe the position of the links. When the links are nearly vertical, the maximum expansion of the
mandrel is indicated. When this occurs, turn the wheel in the opposite direction of expansion.
Hydraulic Version

Use the regulator mounted on the hydraulic pump to set the regulator. The desired operating pressure
is 2000psi max.

Use the setscrew to adjust the pressure in the regulator.
Setting of the Pneumatic Brake
When the feeder stops, the brake prevents spontaneous unwinding of coils. The brake must be set according
to feeding speed, weight, and coil diameter. To increase brake tension: increase the air pressure on the
regulator.
Torque Limiter Setting
The torque limiting clutch mounted on the outlet reducer shaft prevents harmful damage from overloads. The
friction is preset form the factory and generally does not need resetting.