ZLMFTS-012
Sawing
Scraping
1 Ensure the workpiece is
securely held down.
3 If plunge cutting, use a slight
pendulum motion.
1 Turn the multi function tool
on and select the desired
speed.
2 Turn the multi function tool
on.
2 Position the tool on the workpiece at an angle of 10
o
-15
o
.
Note:
Allow the scraper to do the work; do not apply heavy pressure to
the multi function tool. This may cause the multi function tool to
overload or cut into the surface of the workpiece.
When sawing, the multi function tool can be used on wood, plastics and
sheet metal.
Note:
Ensure blades are not blunt or damaged in any way before
commencing.
When being used as a scraper, the multi function tool can remove
materials such as fabric, adhesives or vinyl, from materials such as
wood, plastic, metal and painted surfaces.
10 - 15º
