SSB-406
4. OPERATION
On/Off switch
• To turn the machine on, press
the green On (I) button.
• To turn the machine off, press
the red Off (O) button.
Note:
This variable speed scroll saw is automatically turned off in
the event of a power failure, accidently unplugged or turned off at the
mains power supply. You will need to push the green On (I) button
again to restart the variable speed scroll saw.
Speed setting
The speed can be adjusted by turning the speed selector dial. Adjust
to suit the work piece/ material being cut. The saw’s speed can be
adjusted from 500 to 1,700 SPM (strokes per minute).
• Turn the machine On by pressing the green On ( I ) button.
• Rotate the speed selector dial clockwise
direction “H” for a higher or faster speed.
• Rotate the speed selector dial anti-
clockwise direction “L” for a lower
or slower speed.
• Turn the machine Off by pressing
the red Off (O) button.
Note:
By using a scrap piece of timber to determine the optimum
speed by making a trial cut will increase the life of the saw blade.
Dust extraction port
This feature will allow Ø35mm attachments of
a vacuum hose for easy sawdust collection.
L
Bevel cutting
1. Remove the table insert by gently pushing up
from under the saw table and rotate so the slots
of the table inserts are facing down and to the
right as shown.
2. Loosen the table lock knob to allow the
saw table to be tilted to the left. The
saw table can be locked at any angle
from 0° to a 45° to the left for bevel
cutting. Turn lock knob clockwise to
lock.
3. A bevel scale is located under the saw
table as a convenient guide for setting
the appropriate table angle for bevel
cutting. The bevel scale is a guide only,
make a practice cut on scrap material
and adjust the saw table as necessary
for your desired setting.
Note:
When bevel cutting, the work piece
holder can be adjusted so that it is parallel
to the saw table.
4. Loosen the screw at the front of the
work piece holder and then tilt so that it
is parallel to the saw table. Tighten the
screw to secure the work piece holder
in place.
L
L
OFF
ON
