background image

STAPLE 

NAIL GUN

8MM-14MM

INSTRUCTION MANUAL

SPECIFICATIONS

Input:  

19W

Voltage:  

230-240V ~ 50Hz

Impact Rate: 

20/min

Magazine Capacity: 

100Pcs

Staple Type: 

T50 18 Gauge

Staple Length: 

8-14mm

Nail Type:  

Brad 18 Gauge

Nail Length: 

14-16mm

Weight:  

0.95kg

SNG-2000

WHAT’S IN THE BOX

Staple Nail Gun

Staples

IN ORDER TO MAKE A CLAIM UNDER THIS 

WARRANTY YOU MUST RETURN THE PRODUCT 

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH 

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO 

RETURNING YOUR PRODUCT FOR WARRANTY 

PLEASE TELEPHONE OUR CUSTOMER SERVICE 

HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 

36 months from  

the original date of purchase 

and is

 

intended for DIY (Do It 

Yourself) use only.

 

If a product is defective it will  

be replaced in accordance with the terms of this warranty.  
Warranty excludes consumable parts, for example: staples etc.

WARNING

The following actions will result in the warranty being void.

• 

 If the tool has been operated on a supply voltage other  

than that specified on the tool.

• 

 If the tool shows signs of damage or defects caused  

by or resulting from abuse, accidents or alterations.

• 

 Failure to perform maintenance as set out within the 

instruction manual.

• 

 If the tool is disassembled or tampered with in any way.

• 

Professional, industrial or high frequency use.

MAINTENANCE

DESCRIPTION OF SYMBOLS

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of 

with household waste but in an environmentally friendly way. Please 

recycle where facilities exist. Check with your local council authority 

for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. 

Reuse of recycled material decreases pollution in the environment. 

Please recycle packaging where facilities exist. Check with your 

local council authority for recycling advice.

•  If the enclosure of the staple nail gun requires cleaning, do not use solvents 

but a moist soft cloth only. Never let any liquid get inside the staple nail gun; 

never immerse any part of the staple nail gun into a liquid.

Note: Ozito Industries will not be responsible for any damage or injuries 

caused by the repair of the staple nail gun by an unauthorised person or by 

mishandling of the staple nail gun.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE 

HAVE THE MODEL NUMBER AND DATE OF 

PURCHASE AVAILABLE. A CUSTOMER SERVICE 

REPRESENTATIVE WILL TAKE YOUR CALL  

AND ANSWER ANY QUESTIONS YOU MAY  

HAVE RELATING TO THE WARRANTY POLICY  

OR PROCEDURE.

OZITO 

Australia/New Zealand (Head Office)

 

1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition  
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded  
at law. You are entitled to a replacement or refund for a major 
failure and for compensation for any other reasonably foreseeable 
loss or damage. You are also entitled to have the goods repaired  
or replaced if the goods fail to be of acceptable quality and the 
failure does not amount to a major failure. 
Generally you will be responsible for all costs associated with  
a claim under this warranty, however, where you have suffered  
any additional direct loss as a result of a defective product you  
may be able to claim such expenses by contacting our customer 
service helpline above.

STAPLE/ NAIL SELECTION

ozito.com.au

 STAPLE NAIL GUN SAFETY WARNINGS

 GENERAL POWER TOOL SAFETY WARNINGS - PERSONAL SAFETY

 ELECTRICAL SAFETY

0714

Common Applications for Staple Length

5/16” 

(8mm)

Insulation, Upholstery, Weather Stripping, 

Wall Decorations, Crafts, Covering Cornices, 

Webbing, Light Fabrics.

3/8” 

(10mm)

Insulation, Carpeting, Wire Mesh, Plastic 

or Canvas Coverings, Roofing Paper, Felt 

Stripping, Weather Stripping.

1/2” 

(12mm)

Insulation, Carpet Underlay, Porch Screens, 

Picture Frames, Wire Mesh, Netting, Roofing 

Paper, Panelling.

9/16” 

(14mm)

Ceiling Tile, Heavy Insulation, Insulation Board, 

Trellises, Roofing, Carpeting.

Common applications: T-Nails

9/16” 

(14mm)

Trim Moulding, Panelling, Picture Frames, 

Model Work, Any Finish Nailing Application.

Nails

8

10
12
14

Width

10.6mm

Depth

1.2mm

0.6mm

Front View

Side View

T50 STAPLE SIZE

18 GAUGE BRAD NAIL SIZE

Width

2mm

Front View

14
16

1mm

The SNG-2000 accepts staples with the below measurements

The SNG-2000 accepts nails with the below measurements

V

Hz

~

W

 

 /min  

 

n

 

Volts

Alternating current

Revolutions or 

reciprocation per minute

Double insulated

Warning

Hertz

Watts

No load speed

Regulator compliance mark

ga

Gauge

• 

Always assume that the tool contains fasteners.

 Careless handling of the 

nailer or stapler can result in unexpected firing of fasteners and personal injury.

• 

Do not point the tool towards yourself or anyone nearby.

 Unexpected 

triggering will discharge the fastener causing an injury.

• 

Do not actuate the tool unless the tool is placed firmly against the 

workpiece. 

If the tool is not in contact with the workpiece, the fastener may be 

deflected away from your target.

• 

Disconnect the tool from the power source when the fastener jams in 

the tool. 

While removing a jammed fastener, the nailer or stapler may be 

accidentally activated if it is plugged in.

• 

Do not use this nailer or stapler for fastening electrical cables.

 It is not 

designed for electric cable installation and may damage the insulation of 

electric cables thereby causing electric shock or fire hazards.

WARNING!

 

Read all safety warnings and all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or serious injury. 

 

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers 

to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety 

a.  

 Keep work area clean and well lit

. Cluttered or dark areas invite accidents. 

b.  

 Do not operate power tools in explosive atmospheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks which may ignite the dust or fumes. 

c.  

 Keep children and bystanders away while operating a power tool.

 Distractions can cause you to 

lose control.

2. Electrical safety 

a.  

 Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power tools.

 Unmodified plugs and matching outlets will 

reduce risk of electric shock. 

b.   

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric shock if your body is earthed or grounded. 

c.   

Do not expose power tools to rain or wet conditions.

 Water entering a power tool will increase the 

risk of electric shock. 

d.  

 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges or moving parts.

 Damaged or entangled cords increase 

the risk of electric shock. 

e.   

When operating a power tool outdoors, use an extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of electric shock. 

f.  

 If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) 

protected supply.

 Use of an RCD reduces the risk of electric shock. 

3. Personal safety 

a.  

 Stay alert, watch what you are doing and use common sense when operating a power tool. Do 

not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

 A 

moment of inattention while operating power tools may result in serious personal injury. 

b.  

Use personal protective equipment. Always wear eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce 

personal injuries. 

c.  

 Prevent unintentional starting. Ensure the switch is in the off-position before connecting to 

power source and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your 

finger on the switch or energising power tools that have the switch on invites accidents. 

d.   

Remove any adjusting key or wrench before turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may result in personal injury. 

e.   

Do not overreach. Keep proper footing and balance at all times.

 This enables better control of the 

power tool in unexpected situations. 

f.  

 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away 

from moving parts.

 Loose clothes, jewellery or long hair can be caught in moving parts.

g.   

If devices are provided for the connection of dust extraction and collection facilities, ensure 

these are connected and properly used.

 Use of dust collection can reduce dust-related hazards.

4. Power tool use and care 

a.  

 Do not force the power tool. Use the correct power tool for your application. 

The correct power tool 

will do the job better and safer at the rate for which it was designed. 

b.   

Do not use the power tool if the switch does not turn it on and off.

 Any power tool that cannot be 

controlled with the switch is dangerous and must be repaired. 

c.  

 Disconnect the plug from the power source and/or the battery pack from the power tool before 

making any adjustments, changing accessories, or storing power tools.

 Such preventive safety 

measures reduce the risk of starting the power tool accidentally. 

d.   

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the 

power tool or these instructions to operate the power tool.

 Power tools are dangerous in the hands 

of untrained users. 

e.   

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and 

any other condition that may affect the power tool’s operation. If damaged, have the power tool 

repaired before use.

 Many accidents are caused by poorly maintained power tools. 

f.  

 Keep cutting tools sharp and clean.

 Properly maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control. 

g.   

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking 

into account the working conditions and the work to be performed. 

Use of the power tool for 

operations different from those intended could result in a hazardous situation. 

5. Service 

a.  

 Have your power tool serviced by a qualified repair person using only identical replacement 

parts. 

This will ensure that the safety of the power tool is maintained.

 

WARNING! 

When using mains-powered tools, basic safety precautions, including 

the following, should always be followed to reduce risk of fire, electric shock, personal 

injury and material damage. 

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, 

before operating the tool. 
Save these instructions and other documents supplied with this tool for future reference.
The electric motor has been designed for 230V and 240V only. Always check that the power supply 

corresponds to the voltage on the rating plate.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.

This tool is double insulated in accordance with AS/NZS 60745-1; 

 

therefore no earth wire is required.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to 

avoid a hazard.

Note:

 Double insulation does not take the place of normal safety precautions when operating this 

tool. The insulation system is for added protection against injury resulting from a possible electrical 

insulation failure within the tool.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before use, inspect 

the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or 

defective.

When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead 

not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire 

and electric shock.

Read instruction manual

Wear eye protection

Summary of Contents for SNG-2000








Reviews: