SDR-050
4. OPERATION
1 Turn the unit on by pressing
the on/off button and complete
the calibration instructions in
the previous section.
3 Move the unit slowly in a
horizontal direction along the
surface.
5 Continue to move the unit
slowly until all bars on the
display are filled. Mark this
position on the wall.
2 Once the calibration is
complete (indicated by 3
beeps), continue to hold the
detection button down.
4 If you get close to the search
object, bars will start to appear
on the digital display.
6 Once this position has been
marked, the detection button
can be released.
7 Repeat this process in the
opposite horizontal direction
and make a second mark.
These marks indicate the
edges of the object.
Note:
The middle of these marks
indicates the centre of the object.
STUD METAL DEEP AC
STUD METAL DEEP AC
STUD METAL DEEP AC
STUD METAL DEEP AC
STUD METAL DEEP AC
STUD METAL DEEP AC
MIDDLE OF OBJECT
