1
www.supercircuits.com
CCR-1_QuickStart
CCR-1 Covert Camera System
Quick Start Guide
The CCR-1 kit includes a snake camera, alarm (reed) switch and magnet, DVR, a
MON-1 setup monitor, and associated cables and accessories.
DVR Remote Control
Video - Power
Cable Harness
Power Adapter
Audio - Video
Out
Cable
Video - In
Cable
RCA Male to
RCA Male Cable
MON-1
Setup
Monitor
Alarm
Switch
Cable
DVR
Snake Camera
and Adapter
CCR-1 System Major Components
Step 1. Connections
•
insert an SD card into the DVR.
•
Connect the alarm switch cable to the DVR.
•
Mount the alarm switch in an appropriate location. Position the magnet close to
the switch.
•
Connect the Snake camera adapter cable to the camera drop cable, and to the
RCA male video – power end of the video – power cable harness as shown
below.
Connect the other end of the video – power cable harness to the mating AV IN
and DC 12V ports on the DVR.
•
Install 3 AAA batteries in the MON-1 setup monitor.
Connect one end of the RCA male to RCA male cable to the video in port on
the MON-1 setup monitor, then connect the other end of the cable to the video
(yellow RCA female) connector of the Audio - Video Out cable.
Connect the other end of the Audio - Video Out cable into the AV OUT connector
on the DVR.
Continue
➥
