MAX
MIN
1 Squeeze and hold the switch.
1 To increase the top
speed, rotate the speed
adjustment dial clockwise.
2 To decrease the top
speed, rotate the speed
adjustment dial anti-
clockwise.
The speed adjustment dial restricts the range of the switch resulting in a
decreased top speed.
3 To stop the screwdriver,
squeeze the switch in and
then release.
2. CONTROLS
1 For forward rotation, push the fwd/rev lever hard left. For reverse
rotation push the fwd/rev lever hard right.
OPERATION
Forward/ Reverse Lever
FWD
REV
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK THE
USE OF A RESIDUAL CURRENT DEVICE (RATED AT 30mA
OR LESS) IS RECOMMENDED.
1 To start drilling squeeze the on/off
trigger.
Note:
To increase the speed, simply
squeeze harder.
Turn the torque collar to the desired
setting to limit the screw depth.
Note:
The screwdriver will
automatically stop once the
screw has reached the desired
depth.
2 To stop drilling, release the variable
speed trigger.
Note:
Thescrewdriverisfittedwithautomaticstart-stopgearingwhich
will only start screwing when pressure is applied to the driver bit.
2 Press the lock-on
button in to allow
the tool to continue
operating without
holding the switch.
Lock-On Button
Speed Adjustment Dial
Variable Speed Switch
Torque Collar
