ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 6.35mm (1/4”) Chuck
2 Torque Collar
3 Chuck Tightening Collar
4 Forward Reverse Lever
5 Lock-On Button
6 Sure Grip Handle
7 Speed Selection Dial
8 Variable Speed Switch
POWER SCREWDRIVER
KNOW YOUR PRODUCT
1. INSERTING BITS
SETUP & PREPARATION
1
7 8
3
2
4 5 6
WARNING:
ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLPY BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
1 Loosen the tightening collar to
allow the bit to slide in.
1 Loosen the tightening collar by
rotating anti-clockwise.
3 Secure the bit by turning the
tightening collar in a clockwise
direction.
2 Slide the bit into the
chuck.
2 Slide the bit out of
the chuck.
Inserting a 6.35mm (1/4”) Bit
Removing the Bit
Note:
We recommend the use of forged
driver tip bits for this product. Do
not use extension bits.