background image

TYPE

QTY/ SIZES INCLUDED

APPLICATIONS

GRINDING ACCESSORIES

Dressing Stone

x1

Use to refine the edges of the other 

grinding accessories after they have been 

used.

Aluminium Oxide 

Grinding Stones & 

Wheels

Wheels x6

Stones x6

Suitable for various kinds of grinding and 

sharpening applications. Available in a 

wide range of sizes and shapes - round, 

pointed, flat etc.

Silicon Carbide 

Grinding Stones & 

Wheels

Wheels x6

Stones x4

These are made for use on hard materials 

such as glass and ceramics. Typical uses 

might be the removal of stilt marks and 

excess glaze on ceramics.

POLISHING ACCESSORIES

Wire Brushes

Brass x3

Steel x1

Brass brushes are softer than steel, 

making them good for use on gold, cooper 

and brass. The steel wire brush is good for 

general purpose cleaning.

Bristle Brush

Nylon x3

Useful for cleaning silverware, jewelley 

and antiques. Use with polishing 

compound for faster cleaning or polishing.

Fabric Tips and 

Wheels 

Cloth Wheel x1

25.4mm x 6.7mm Felt Wheel x1

12.7mm x 6mm Felt Wheel x4 

Felt Wheel Point x1 

Used for bringing metal surfaces to 

a smooth finish. Use with polisihing 

compound to bring a high shine to the 

finish.

Rubber Emery 

Wheel

x1

Useful when cleaning, finishing or 

polishing an edge. Can also be used for 

deburring.

MISCELLANEOUS

Drill Bits

1.5mm x2
2.3mm x2
3.2mm x2

Used to drill through all types of plastic 

and wood.

ACCESSORY GUIDE

Summary of Contents for RTK-2100











Reviews: