3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
After removing the shredder from the
carton, check that the shredder has not
been damaged. Unpack the contents.
Fitting the wheels and stand
1. Carefully place the shredder housing
upside down on a flat surface. Place
each leg of the stand into the two holes
at the base of the shredder housing.
2. Using a screwdriver (not included)
secure the legs using the two
screws and washers provided, turn
in a clockwise direction.
3. Thread the wheel axle through
the leg stand.
4. Insert the wheel spacer followed by
the wheel bush onto each end of the
wheel axle.
1. Transport handle
2. Hopper
3. Locking knob
4. On/Off switch
5. Power cord
6. Motor housing
7. Collection bag hook
8. Discharge chute
9. Stand
10. Wheel
11. Push stick
12. Collection bag
13. Hex key
14. Spanner
RAPID SHREDDER
ACCESSORIES
KNOW YOUR PRODUCT
1. WHEELS & STAND
ASSEMBLY
1
2
3
4
5
6
7
8
9
14
WARNING!
YOU MAY REQUIRE ASSISTANCE
LIFTING THE SHREDDER OUT OF THE CARTON.
11
12
WARNING!
ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
10
13
