Forward / Reverse Lever
1. For forward rotation, push the lever hard right. For reverse rotation
push lever to the left.
Adjusting the Speed
The speed of the drill can be varied by applying lesser or
greater pressure on the variable speed trigger.
2. SDS
+
ACCESSORIES
3. CONTROLS
1. Prior to insertion into
chuck, ensure the SDS
+
accessory is clear of
dust and debris.
3. Pull locking sleeve back
and hold.
5. Rotate and continue to
insert as far as possible.
7. Check that the SDS
+
accessory is locked by trying
to pull it out.
It should have approx 10 –
20mm movement. This is
normal.
2. Prior to insertion into
chuck add lubricant to
the SDS
+
accessory.
4. Insert SDS
+
Accessory.
6. Release locking sleeve.
8. To remove the SDS
+
accessory pull back the
locking sleeve and pull
accessory out.
Accessory
SDS
+
OPERATION
1. To start drilling
squeeze the
variable speed
trigger.
2. To lock the trigger,
press the trigger
locking button in
while holding the
trigger down.
3. To unlock the
trigger squeeze on
the trigger and to
stop drilling release
the trigger.
1. Lower pressure results in a
lower speed.
2. Higher pressure results in
a higher speed.
Variable Speed Trigger
HIGH
MAX
SPEED
LOW
MAX
SPEED
FWD
REV
To reduce the risk of electric shock, a residual current device
(rated 30mA or less) must be used.
