![background image](http://html1.mh-extra.com/html/ozito/rhd-2100/rhd-2100_instruction-manual_1666661002.webp)
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. SIDE HANDLE AND SAFETY CHECKS
KNOW YOUR PRODUCT
1. Turn handle locking knob anti-
clockwise to loosen.
3. Retighten the handle locking
knob in order to lock the side
handle into position.
2. Slide the side handle over the
chuck and turn to the desired
position.
1 SDS
+
Accessory Holder
2 Accessory Locking Sleeve
3 Mode Selector Dial
4 Mode Locking Button
5 Forward/Reverse Lever
6 Variable Speed Trigger
7 Speed Selection Dial
8 Lock-on Button
ROTARY HAMMER DRILL
SETUP & PREPARATION
Ensure the tool is disconnected from the power supply before
performing any of the following operations.
The side handle will enable better stability whilst drilling and must be
used at all times for safety reasons.
1. Depress and release the
variable speed trigger to
ensure it is not locked on.
3. Secure the material to be drilled in a vice or clamp to stop it
turning whilst drilling.
4. Plug the hammer drill into the power supply.
2. Check the forward/
reverse lever for the
correct setting.
Safety Checks
Before connecting to a power supply, perform a few simple checks.
FWD
REV
9 Side Handle
10 Handle Locking Knob
11 Depth Rod
ACCESSORIES