3. CONTROLS & OPERATION
OPERATION
Switching On and Off
CAUTION!
BEFORE YOU START THE UNIT, MAKE SURE
THAT THE LINE TRIMMER IS NOT MAKING CONTACT
WITH ANY OBJECTS.
WARNING!
INSPECT THE AREA TO BE TRIMMED
AND REMOVE ANY WIRE, CORD OR STRING-LIKE
OBJECTS WHICH COULD BECOME ENTANGLED IN
THE ROTATING SPOOL & LINE.
WARNING!
DO NOT OPERATE THE TRIMMER ON A
TREE, ON A LADDER, OR ON A SCAFFOLD. THIS IS
EXTREMELY DANGEROUS.
CAUTION!
BYSTANDERS MUST KEEP A MINIMUM SAFE
DISTANCE OF 10M AWAY FROM THE TRIMMER WHILE
IT IS OPERATING.
WARNING!
STONES, PIECES OF METAL AND OTHER
OBJECTS CAN BE THROWN OUT AT HIGH SPEED BY
THE CUTTING LINE.
2. Squeeze the variable speed
trigger to start the line
trimmer.
Note:
The more the variable
speed trigger is depressed,
the faster the cutting line will
rotate.
3. To stop the trimmer,
release the trigger.
NOTE:
DO NOT CUT GRASS WHEN WET. (THE BEST
RESULTS ARE ACHIEVED ON DRY GRASS.)
1. Extend the edging guide to
prevent the cutting head from
getting too close to an object
such as a tree trunk or wall.
2. Hold the trimmer with both
handles and wear the shoulder
strap over the left shoulder for
best control and balance..
3. To turn on squeeze the variable
speed trigger whilst holding the
safety switch forward.
4. Move the line trimmer into the
grass to allow it to cut.
6. Release the variable speed
trigger and allow the motor to
come to a complete standstill.
5. Several passes will be required
to cut long grass.
Using the Line Trimmer
1. Align the ribs of the battery with
the recess in housing and slide in
until it clicks into place.
2. To remove, press and hold the
battery release tab and then slide
out.
Inserting & Removing the Battery
30°
30°
1. Press and hold the safety
switch forward with your
thumb.
