PXCLTS-0182
Trimming
Move the grass trimmer from side to
side as you walk forward, holding it at
an angle of approx. 30° (Light cuts are
better than heavy cuts as they allow
the cut grass to fall away from the
cutting head).
30°
30°
Bump Feed
The line trimmer is fitted with a bump feed function which allows the line to
be feed without stopping the line trimmer. If the line trimmer is not cutting
correctly the line may need to be feed using this feature.
1. While the line trimmer is
still on, simply bump the
head of the trimmer on the
ground to allow the line to
feed out.
2. The bump feed will
automatically lock once off
the ground so that the line
will stop feeding.
CAUTION!
DO NOT BUMP THE HEAD ON ANY HARD
SURFACES SUCH AS CONCRETE OR BRICK, THIS COULD
CAUSE DAMAGE TO THE LINE TRIMMER.
Use only the tip of the cutting line to do the trimming especially near walls
and fences. Trimming with the side of the cutting line may overload the motor,
wear out the line faster, and break the line more often.
4. WALL HOLDER
STORAGE
The line trimmer is equipped with a integrated wall holder, this enables it to
be easily hung on a wall.
