background image

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to 

the online manual.

Fitting the Adjustable Handle

1   Fit the handle mounting 

bracket onto the upper 

section of the shaft.

Note:

 You will need to carefully 

flex the mounting bracket just 

enough to slip over the shaft. 

Do not over flex as this can 

damage or break the mounting 

bracket.

2   Place the adjustable handle 

on the mounting bracket, 

then pass the screw 

with washer through the 

mounting bracket and onto 

the adjustable handle lever.

KNOW YOUR PRODUCT

1.  ASSEMBLY

SETUP & PREPARATION

1   Extend the edging guide to 

allow the safety guard to 

go over the spindle.

3   Slide in until it clicks into 

place.

2   Align the tabs of the 

safety guard with 

the recess in the 

back of the cutter 

head.

Fitting the Safety Guard

WARNING!

 

ENSURE THE TOOL IS SWITCHED OFF AND 

BATTERY DISCONNECTED BEFORE PERFORMING ANY 

OF THE FOLLOWING TASKS.

WARNING!

 

NEVER USE THE GRASS TRIMMER UNLESS 

THE SAFETY GUARD IS PROPERLY FITTED.

CORDLESS GRASS TRIMMER

1

10

2

11

3

12

4

13

5

6
7
8

9

1   Telescopic Shaft 

2  Shaft Adjustment Collar
3  Adjustable Handle Lever
4  Adjustable Handle
5  Lock-off Switch
6  Rear Handle

7  On/Off Trigger

8  Battery Seating

9  Head Tilt Button

10 Edging Guide

11 Cutter Head

12 Safety Guard
13 Cutting Blade

ACCESSORIES

14

14 Blades

BATTERY & CHARGER (sold separately)

Compatible chargers

Eco charger 

PXCSCH-120

  “ 

“ 

PXCG-120

Fast charger 

PXCFCH-030

  “ 

“ 

PXCG-030

Compatible battery packs

1.5Ah 

PXCBAT-015

  “ 

PXBP-150

3.0Ah 

PXCBAT-030

  “ 

PXBP-300

5.2Ah 

PXCBAT-052

  “ 

PXBP-520

Summary of Contents for PXCLTS-018










Reviews: