3. INSERTING & REMOVING THE BATTERIES
4. CONTROLS
OPERATION
1 Pull the securing latch
forward and open the
battery cover.
1 Press and hold the lock-off
button.
1 Push lever 1 outwards
away from the mower body
and hold to release the
lever.
3 Release the start/stop lever
to stop the mower.
To prevent accidental start up, the mower is fitted with a dual
action switch.
The height adjustment lever provides 6 cutting heights from
25mm to 75mm.
1 Pull the securing latch
forward and open the
battery cover.
3 Insert the safety key.
(If the mower is not going to
be used immediately, do not
insert the safety key.)
2 Press the battery release
tab and remove the
batteries.
2 Slide two batteries of the
same capacity and same
charge state into the
mower aligning the ribs so
that they click into place.
2 Pull the start/stop lever
towards the handle to
start the mower and then
release the lock-off button.
2 Adjust 2 until the required
cutting height is selected.
4 Close the battery cover.
3 Close the battery cover.
Inserting the Batteries into the Mower
Switching On and Off
Adjusting the Cutting Height
Removing the Batteries from the Mower
CAUTION:
BE CAREFUL DURING CUTTING HEIGHT
ADJUSTMENTS TO PREVENT ENTRAPMENT OF THE
FINGERS BETWEEN MOVING HEIGHT ADJUSTMENT
LEVER AND THE MOWER HOUSING.
PXCLMK-018
3 Release lever 1 and check
that it is securely seated in
the required cutting height.
