KNOW YOUR PRODUCT
SETUP & PREPARATION
1. ASSEMBLY
1. Guide Wheels
2. Lower Tubes
3. Upper Tubes
4. Auxiliary Handle
5. Shoulder Strap Hook
6. Variable Speed Dial
7. On/Off Trigger
8. Collection Bag
9. Mode Selector
10. Battery Seating
11. Main Handle
Brushless Blower Vac
1
2
3
4
5 6
7
8
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
ONLINE MANUAL
Sc
an this QR Code with your
mobile device to take you to the
online manual.
ACCESSORIES
12. Shoulder Strap
13.
Assembly Screws 1 x 16mm,
2 x 50mm long.
12
13
10 11
9
STOP
STOP
CAUTION:
ENSURE THE TOOL IS OFF & THE BATTERY
REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Assembling the Tubes
1. Place the lower tube onto the
upper tube.
2. Secure the tubes together with
supplied 50mm long security
screw using a flat tip screwdriver
(not included).
Note:
Once installed the security screw cannot be removed.
STOP
STOP
3. Feed the top of the assembled
tubes into the motor housing. Push
together until they are connected
firmly.
4. Secure in place with the
remaining 50mm long security
screw.
STOP
5. Slide the wheel support over the
lower tube as far as the stop.
6. Secure with the supplied 16mm
long screw using cross tip
screwdriver (not included).
7. Place both wheels onto either side of the bracket, push to lock in place.
STOP
STOP