5. OPERATION
6. USING THE INFLATION ADAPTORS
Blowing
The blower is ideal for dirt, clippings and other debris.
Inflation Adaptors
The PXWBS-200 comes complete with 3 inflation adaptors in varying sizes
which are suited for use on devices that require a large air volume, at a low
pressure. These include items such as air mattresses and pool toys.
WARNING!
DO NOT SWITCH THE BLOWER ON IN
POORLY VENTILATED SPACES OR IN THE PRESENCE
OF FLAMMABLE AND/OR EXPLOSIVE LIQUIDS, GASES
AND POWDERS.
WARNING!
ENSURE THE BLOWER OUTLET IS NOT
BLOCKED DURING USE.
2 Move the blower from side
to side while walking slowly
forward.
3 Connect inflation adaptor to
the blower housing and rotate
adaptor clockwise until it
clicks into locked position.
4 To fit inflation adaptor to a
small inlet, use either of the
other 2 adaptor ends. Fit larger
end of smaller adaptor piece to
central adaptor.
5 Fit small end of adaptor to
the inlet on the device to be
inflated. Once fitted, use On/
Off switch to inflate device.
6 To Remove adaptor, turn in
anti-clockwise direction.
Note:
Be aware of other people and animals in the area where you are to be
operating the blower.
Note:
Avoid collisions with hard objects which could damage your machine.
Note:
The PXWBS-200 Blower / Inflator is not suited to inflating devices
that require high air pressure - such as sporting equipment and car types.
1 Hold the blower firmly,
squeeze the on/off switch.
1 Remove blower nozzle.
2 Line up nodes on inside of
centre inflation adaptor with
the blower connection slot.
PX2DB-215
