3. ASSEMBLY
4. CONTROLS
OPERATION
Switching On and Off
Connecting the Blower Nozzle or Extension Nozzle
WARNING!
DO NOT USE THE BLOWER WITH ANY
ACCESSORIES OR ATTACHMENTS OTHER THAN THOSE
SUPPLIED. SUCH USAGE MIGHT BE HAZARDOUS.
WARNING!
DO NOT PUT PART OF YOUR BODY SUCH
AS HANDS AND FINGERS NEAR THE INLET OR OUTLET
OPENING.
2 To stop the blower release the
on/off switch.
2 Both the blower nozzle and
extension nozzle are fitted with
internal nodes that line up and
slot into the blower housing.
4 To lock into place, rotate nozzle
in clockwise direction until
nozzle clicks into place.
5 To remove blower nozzle,
rotate in an anti-clockwise
direction.
3 Line up the internal nozzle
nodes with the blower housing
and slide into place.
1 To start the blower squeeze
the on/off switch.
1 The blower end is equipped
with slots to ensure nozzles
and adaptors lock into place
and remain fitted during use.
WARNING!
ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.