PWE-1300
5. SPRAYING
4. PRE-START PROCEDURE
1. Ensure power supply is
connected.
2. Ensure water supply is
connected.
3. Ensure water supply is turned on.
4. Squeeze trigger on the gun until there is a steady flow of water from
the nozzle.
1. Switch the machine On, set the On/Off
switch to position “I” (On
2. Squeeze trigger to begin spraying.
3. When finished, set On/Off switch to
position “0” (Off).
4. Release built up water pressure by
squeezing the trigger.
5. Turn water supply off.
6. Switch off the mains power supply
and remove the electrical plug.
