background image

DESCRIPTION OF SYMBOLS

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of 

with household waste but in an environmentally friendly way. Please 

recycle where facilities exist. Check with your local council authority 

for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. 

Reuse of recycled material decreases pollution in the environment. 

Please recycle packaging where facilities exist. Check with your 

local council authority for recycling advice.

Spare parts can be ordered from the Special Orders Desk 

at your local Bunnings Warehouse. 
For further information, or any parts not listed here, visit 
www.ozito.com.au or contact Ozito Customer Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

SPARE PARTS

/min

      

Revolutions or 

 

    reciprocation per minute

l/min

       Litres per minute  

  

dB

          

Decibel level

   

psi

 

    

Pounds per square inch            

BAR

        

Pressure rating

       

 

     

  

Regulator compliance mark

Warning

Read instruction manual

 Hp

      

Horse power

Ingress protection from water

IPX5

W

Watts

~

Alternating current

Volts

V

Hz

Hertz

Warning! 

High pressure jets can be dangerous if not used properly. 

Do not direct the jet at persons, animals, live electrical equipment or

 the pressure washer itself.

 

Double insulated

MPa

Megapascal

This machine is not suitable for connecting to the drinking water
network unless a backflow preventer is installed on the inlet of the 

 pressure washer.

 

96

Sound power level

8. STORAGE

The high pressure cleaner should be fully emptied of water each 

time after use. This requires you to switch on the equipment without 

a connected water supply and to squeeze trigger on the gun (max. 1 

minute) until no more water emerges. Then you must switch off the 

equipment.

Summary of Contents for PWE-1300









Reviews: