![background image](http://html1.mh-extra.com/html/ozito/pwb-012/pwb-012_instruction-manual_1666644008.webp)
Fitting the cleaning brush
•
Fit the cleaning brush handle (3) onto the cleaning
brush (9). Tighten by hand in a clockwise direction
(Fig. 1).
Note:
Do not over tighten as this could damage
the thread.
•
Attach one end of the water hose (12) to the
assembled cleaning brush (9) by inserting the water
hose (12) and tighten by hand in a clockwise
direction (Fig. 2).
•
Remove cover from water outlet (7) and attach the
other end of the water hose (12) to the water outlet
(7) of the portable washer by inserting the water
hose (12) and tighten by hand in a clockwise
direction (Fig. 3).
Fitting the spray gun
•
Attach one end of the water hose (12) to the spray
gun (11) by inserting the water hose (12) and
tighten in a clockwise direction (Fig. 4).
•
Attach the other end of the water hose (12) to the
water outlet (7) of the portable washer, if you have
not already done so by inserting the water hose
(12) and tightening by hand in a clockwise
direction.
The portable washer is powered by a 12 Volt DC utility socket (cigarette lighter
socket) in your car. The atomized water sprayed through the cleaning brush (9) and
the water poured by the spray gun (11) can easily wash away the dirt on your car,
boat or caravan.
The portable washer is harmless to your cars paint and is conveniently portable.
Cleaning Solutions
Only use a cleaning solution that is suitable for the application recommend by the
manufacture, e.g. car wash for washing cars etc. Always following the manufactures
instructions supplied with the cleaning solution for proper use.
ASSEMBLY
7
Fig. 1
Fig. 2
Fig. 3
Fig. 4
PREPARATION