![background image](http://html1.mh-extra.com/html/ozito/pwb-012/pwb-012_instruction-manual_1666644009.webp)
8
Remove the lid (2) by simply releasing the clips (13) on either side and empty the
contents of the portable washer if you have not already done so before filling with
water and appropriate liquid cleaning solution.
Note:
It is recommended that after filling the portable washer with water it is
transported via the container handle and NOT the lid handle (1).
•
Fill the portable washer with fresh clean tap water to a maximum of 16 litres. Do
not over fill.
•
Add the liquid cleaning solution as per the manufactures instructions for proper use.
•
Plug the power cord (8) to the DC socket (6) on the
portable washer (Fig. 5). Turn the knurled nut
clockwise by hand to tighten.
•
Plug the 12V DC plug end of the power cord (8) into
the 12V DC utility socket in your vehicle (Fig. 6).
•
Run the power cord (8) from the vehicles rubber door
seal and close the door (Fig. 7).
Note:
This will not damage or affect the power cord (8) power supply.
Fig. 5
Fig. 6
Fig. 7
OPERATION