ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
10
10
11
12 13
1. Air Bleed Valve
2. Float Switch Cable
3. Outlet
4. Float Switch
5. Suction Base
6. Pump Housing
7. Float Switch Adjustor
8. Handle
SUBMERSIBLE PUMP
KNOW YOUR PRODUCT
1. UNIVERSAL ADAPTOR
Preparing the Universal Adaptor
The universal adaptor is designed to fit various sizes of pipes and
fittings.
9. L-Shape Connector
10. Universal Adaptor
11. 20m Nylon Lowering Rope
12. Ø25mm x 10m Lay Flat Hose
13. Ø25mm Stainless Hose Clamp
ACCESSORIES
SETUP & PREPARATION
To fit a 25mm (1’’) tap adaptor
(temporary application only)
1. Cut the universal adaptor using a
hack saw (not included). Ensure
all flashing is removed.
2. It is now ready to be fitted with a
25mm (1’’) screw on tap adaptor
(not included).
To fit a 32mm (1¼’’)
flexible tubing
Cut the universal adaptor using
a hack saw. It is now ready to be
fitted with a 32mm (1¼’’) rigid pipe
or flexible tubing (not included).
To fit a 25mm (1’’) Lay flat hose or
flexible tubing
No cutting of the universal adaptor
is required. It is ready to be fitted
with the 25mm (1’’) Lay flat hose
or flexible tubing (not included).
10
WARNING!:
ENSURE THE PUMP IS
DISCONNECTED FROM THE POWER
SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
