2. CUTTING BLADES
CAUTION!
DO NOT HANDLE BLADES WITHOUT GLOVES
AS THEY ARE SHARP AND CAN BECOME HOT AFTER
USE, POTENTIALLY CAUSING PERSONAL INJURY.
2 Insert the cutting blade into the
blade holder.
2 Remove the cutting blade from
the blade holder.
2 Pull the clamping jaw away
from the saw body.
1 Rotate and hold
the blade holder
clockwise.
1 Rotate and hold
the blade holder
clockwise.
3 Release the blade
holder and ensure
the blade is secure
by pulling on the
blade.
1 Press and hold the
clamping jaw release
into the unlock
position.
3 Lower the clamping
jaw from the shoe to
remove.
The pruning saw can be fitted with standard reciprocating saw blades,
therefore can be used to cut various timbers and plastics. If the
clamping jaw is going to be used, ensure it is fitted before installing the
blade.
Fitting a Cutting Blade
Removing the Cutting Blade
Removing the Clamping Jaw
