PXWLS-800U
4. SWITCHING THE LIGHT ON & OFF
3. ADJUSTING THE BEAM SPREAD
OPERATION
Adjusting the Beam Spread
Adjusting the Light Angle
The worklight has 2 beam settings that can be adusted with the beam setting
dial. The settings include a narrow to concetrate the light at a specific area
and a wide setting to illuminate a large area.
The worklight can be tilted through 7 positions to aim the light at the desired
area.
2 For a wide beam, rotate
the beam setting dial
clockwise “
”.
2 To turn the light off,
press the on/off switch
again.
2 To aim the light away from the
ground, tilt the light backward.
1 For a narrow beam,
rotate the beam setting
dial anti-clockwise “
“.
1 To turn the light on,
press the on/off switch.
1 To aim the light closer to the
ground tilt the light forward.
