Parallel Guide Adjustment
1. Loosen the parallel guide wingnut.
2. Slide the guide to the required
position and tighten the wingnut.
3. After adjusting the parallel guide, make
sure the guide is clear of the blade
by adjusting the position of the angle
bracket.
Turning The Tool On/Off
1. Press and hold the lock-off
button.
2. Pull the on/off trigger to start the tool.
You can then release the lock-off button.
3. Release the on/off trigger to stop
the planer.
Note:
Wait until the blade comes
to a complete stop before setting
the tool down.
Automatic Base Park Shoe
The Base Park Shoe allows you to
rest the planer on the workpiece
without the blades causing dents or
damage.
The park shoe will rotate out of the
way when the tool is pushed along
the work surface.
WARNING!
THE PARK SHOES DOES NOT PROTECT
THE BLADE FROM DAMAGE. ALWAYS WAIT UNTIL
THE BLADE STOPS COMPLETELY BEFORE SETTING
THE PLANER DOWN.
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
