PXCPPS-018
5. INSERTING & REMOVING THE BATTERY
1. Align the ribs of the battery with
the recess below the handle
Removing a Battery from the Pole Pruner
2. Slide the battery in so
that it clicks into place.
1. Press and hold the battery
release tab to release the
battery.
2. Slide the battery out.
Installing a Battery into the Pole Pruner
2. Wear the shoulder strap
so that it lies over the left
shoulder.
1. Fasten to the shoulder strap
holder on the main tube.
Adjusting the Pruner Head
1. Press the two pivoting
head releases, one each
side and adjust the
angle of the pruner head
up or down to any of 7
positions.
Lock Button
Lock Button
2. The pruner head will lock
onto the motor head and is
then secured in place.
1. Pull the lock button to the
right then rotate the pruner
head 90
º
clockwise
Note:
The Lock Button will “CLICK” back to the left (original position) when
the pruner head is correctly secured in place.
•
Adjusting the Pruner Head 90º
Attaching the Shoulder Strap
•
Pivoting the Pruner Head
Note:
Keep the pruner head
pressed against the
motor head when
rotating.
