background image

MAINTENANCE

Spare parts can be ordered from the Special Orders 

Desk at your local Bunnings Warehouse. 
For further information, or any parts not listed here, 
visit www.ozito.com.au or contact Ozito Customer 
Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

SPARE PARTS

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of with household waste 

but in an environmentally friendly way. Please recycle where facilities exist. Check 

with your local council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled 

material decreases pollution in the environment. Please recycle packaging where 

facilities exist. Check with your local council authority for recycling advice.

WARNING: 

BEFORE CLEANING YOUR POLE HEDGE 

TRIMMER OR CARRYING OUT ANY MAINTENANCE 

PROCEDURE, ENSURE THE TOOL IS OFF & THE BATTERY 
REMOVED.

 

 

When not in use, the Hedge Trimmer Head should be stored in a dry, frost 

free location not within the reach of children.

 

 

If the enclosure of the Hedge Trimmer Head requires cleaning do not use 

solvents but a moist cloth only.

 

 

There are no user serviceable parts in the Hedge Trimmer Head; if a fault is 

suspected, please contact Ozito customer service.

 

 

The blade rail should be cleaned and treated with light machine oil or spray 

lubricant (such as WD40, CRC 5.56 or RP7) after each use. When a job lasts 

for a longer period of time it is recommended that the blade rail also be 

treated with spray lubricant at regular intervals during operation.

Wear eye, ear and head protection

Read instruction manual

Do not use in the rain or leave the pole hedge trimmer outdoors

while raining. 

Regulator compliance mark

Wear safety gloves

Keep bystanders away

10 m

102

Maintain a minimum clearance of 10 m from current-carrying lines. 

Life-threatening danger from electric shock.

Sound pressure level

Wear safety boots

Keep hands away from blade

Hertz

Hz

DESCRIPTION OF SYMBOLS

Summary of Contents for POWER X CHANGE PXCG-030C



















Reviews: