2. PREPARATION
Adjusting the Rear Handle
Adjusting the telescope length
1. To unlock the telescopic tube lock, twist it in a
clockwise direction while pointing the trimmer
blade away from the user.
2. Pull out the telescopic tubes to suit the required working height.
1. Press the two pivoting
handle releases, one
each side and adjust
the angle of the handle
up or down to any of 4
positions.
Note:
The locking and unlocking
directions are indicated on
the locking collar.
3. To lock in the desired position, twist the telescopic tube lock in a counter-
clockwise direction.
Adjusting the Additional Handle
a
b
a
b
a
b
a
b
1. (a) Open the handle lever and
set the required (b) tilt of the
additional handle, close to lock
into position.
2. (a) Open the mounting bracket
lever and (b) slide the additional
handle into the required position,
close to lock into position.
2. Wear the shoulder strap
so that it lies over the left
shoulder.
1. Fasten to the shoulder strap
holder on the main tube.
Attaching the Shoulder Strap
Pivoting the Trimmer Head
1. Press the two pivoting
head releases, one each
side and adjust the angle
of the trimmer head
up or down to any of 7
positions.