background image

1.  CHARGING A BATTERY

2.  MAINTENANCE

•   Disconnect the charger from power source before cleaning.
•  Keep the charger in a dry place out of reach of children.
•   If the enclosure of the charger requires cleaning, do not use solvents. Use a dry, soft 

cloth only to wipe down the surface. Never let any liquid get inside the charger; never 

immerse any part of the charger.

•   There are no other parts inside the charger which require maintenance.Do not 

take the charger apart. If the charger is damaged, contact your supplier or the 

manufacturer.

Mounting The Charging Unit On A Wall

The charging unit can be mounted to a wall or workbench.

The correct dimensions for drill holes can be found on the back of the charging unit; a 

template for the mounting hole locations can also be found on the Ozito website.

Note:

 

When mounting on a wall you must use suitable screws, e.g.M3 pan-head 

screws, in order to prevent damage to the housing and risk of falling.

OZITO 

Australia/New Zealand (Head Office)

 

1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU 

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS 

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO 

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE 

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL 

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER 

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND 

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE 

WARRANTY POLICY OR PROCEDURE.

The benefits provided under this warranty are in addition to other rights and 

remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are 

entitled to a replacement or refund for a major failure and for compensation 

for any other reasonably foreseeable loss or damage. You are also entitled to 

have the goods repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure. 
Generally you will be responsible for all costs associated with a claim under 

this warranty, however, where you have suffered any additional direct loss as 

a result of a defective product you may be able to claim such expenses by 

contacting our customer service helpline above.

36 MONTH REPLACEMENT WARRANTY

Your product is guaranteed for a period of 

36 months from the original date 

of purchase

 and is intended for DIY (Do It Yourself) use only. If a product is 

defective it will be replaced in accordance with the terms of this warranty. 

Warranty excludes consumable parts.

WARNING

The following actions will result in the warranty being void.

•   If the tool has been operated on a supply voltage other than that specified 

on the tool.

•   If the tool shows signs of damage or defects caused by or resulting from 

abuse, accidents or alterations.

•   Failure to perform maintenance as set out within the instruction manual.
•   If the tool is disassembled or tampered with in any way.

PXCG-030

Charger LED Indicator Lights

LED Indicator 

Situation

GREEN (Flashing) 

Stand By (no battery pack is inserted) 

RED (Flashing)

Battery is charging (low charge)

RED (Illuminated)

Battery is fast charging (mid charge)

GREEN (Illuminated)

Battery is 85% - 100% charged and is ready for use.

BOTH(Illuminated)

Battery pack is too hot or too cold (charging will begin 
automatically when battery reaches correct charging 
temperature).

BOTH (Flashing)

The battery is deffective, charging is no longer 
possible. Do not charge. Contact Ozito Customer 
Service.

CAUTION:

 

THE CHARGER SHOULD BE PROTECTED BY 

A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR 
LESS).

2.   Align and then slide the ribs on 

the battery into the recess in the 

charger.

1.   Connect the charger to the power 

supply and the LED will flash 

green showing power is being 

supplied to the charger.

3.    The red LED will illuminate while 

the battery charges.

4.    The green LED will illuminate 

once the battery is charged.

0219

Summary of Contents for POWER X CHANGE PXCG-030













Reviews: