4. FUNCTIONS
Drilling
1 To drill into wood, metal or plastic,
turn the function collar and align the
arrow on the housing with the drill
icon.
Screwdriving
Hammer Drilling
1 To screw into wood, metal or
plastic, turn the function collar
to align the arrow on the housing
with the screw icon.
The clutch is then enabled to
adjust torque.
Note:
1st gear (low speed)
is recommended for
screwdriving.
1 To drill into concrete, brick or
other masonry, turn the function
collar to align the arrow on the
housing with the hammer icon.
Note:
2nd gear (high speed) is
recommended for hammer
drilling.
2 To adjust the torque, rotate the torque collar to the desired setting.
Note:
Selecting a higher torque setting will allow the drill to use more torque to drive
the screw in or out. To prevent damaging the screw head, it is recommended to
start at a low torque setting and increase as necessary.
Speed Control
1 Slide the switch forward to select
first gear.
2 Slide the switch backward to select
second gear.
The gear selector controls the speed of the drill. First gear allows slower drilling
with more torque, while second gear is suitable when less torque but higher speed is
required.
1st Gear
2nd Gear
Adjusting Torque
1 Rotate the torque collar to the desired setting.
Note:
Selecting a higher torque setting will allow the drill to use more torque to drive
the screw in or out. To prevent damaging the screw head, it is recommended to
start at a low torque setting and increase as necessary.
