background image

BATTERY CHARGE INDICATOR

The purchased battery is equipped with a 
battery charge indicator to show the state of 
the battery charge.
Press the charge indicator button and look to 
see which LED lights.

Battery requires immediate charging

Low state of charge, requires charging soon.

Mid state of charge

Full state of charge.

Note:

 The battery needs to be removed from the tool to check the state of charge. 

BATTERY PROTECTION SYSTEM

The tool is equipped with a battery protection system, which helps to ensure longevity 
of the battery.
The output power automatically cuts off during operation when the tool and/or battery 
are placed under the following situations: 
•   When the tool is overloaded:    
   If this occurs, release the trigger switch and remove causes of overload, then pull 

the switch trigger again to restart. 

•   When the remaining battery capacity becomes low: 
  Recharge the battery pack.

Note:

 

 The battery protection system does not in any way damage the tool.

Note:

  

The indicated capacity may be lower than the actual level during use or 
immediately after using the tool.

1.  OPERATION

CHARGING YOUR LITHIUM ION BATTERY

This battery has been shipped in a low charge condition, and requires charging prior to 
use. Allow several cycles of charging and discharging (through use with a compatible 
tool) for the battery to reach its optimum performance / runtime.
This battery is compatible with chargers from the 18V Ozito Power X Change range 
available through your local Bunnings Warehouse: Product availability may differ 
between countries.

•  

PXMBC-002U Multi Battery Charger

•  

PXCG-030U Fast Charger

•  

PXCG-060U Standard Charger

•  

PXCG-120U Eco Charger

Only use the battery pack with Ozito Power X Change 18V cordless products.

1. 

Insert the power plug of the charger into the mains socket outlet. The green LED 

will begin to flash when properly connected to power supply.

2. 

Insert the battery pack into the battery charger .

3. 

Remove battery from the charger once charged. Disconnect the charger from the 

power supply.

Note:

 

The battery pack can become a little warm during the charging. This is normal

If the battery pack fails to charge, check:

 

if there is voltage at the socket outlet

 

that the battery and charger are properly connected.

If the battery pack still fails to charge, please contact our customer service center.

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to the 

online manual.

PXBP-200U

WARRANTY

All of our products undergo strict quality checks to ensure that they reach you in perfect 

condition. In the unlikely event that your device develops a fault, please contact our 

service department at the address shown on this guarantee card. You can also contact 

us by telephone using the customer service number shown. Please note the following 

terms under which guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the manufacturer 

mentioned below promises to buyers of its new products in addition to their statutory 

guarantee claims are not affected by this guarantee. Our guarantee is free of charge to 

you.

2. The warranty services only covers defects due to material or manufacturing faults on 

a product which you have bought from the manufacturer mentioned below are limited to 

either the rectification of said defects on the product or the replacement of the product, 

whichever we prefer. 

Please note that our devices are not designed for use in commercial, trade or 

professional applications. A guarantee contract will not be created if the device has 

been used by commercial, trade or industrial business or has been exposed to similar 

stresses during the guarantee period.

3. The following are not covered by our guarantee: 

- Damage to the device caused by a failure to follow the assembly instructions or due 

to incorrect installation, a failure to follow the operating instructions (for example 

connecting it to an incorrect mains voltage or current type) or a failure to follow 

the maintenance and safety instructions or by exposing the device to abnormal 

environmental conditions or by lack of care and maintenance. 

- Damage to the device caused by abuse or incorrect use (for example overloading the 

device or the use or unapproved tools or accessories), ingress of foreign bodies into the 

device (such as sand, stones or dust, transport damage), the use of force or damage 

caused by external forces (for example by dropping it). 

- Damage to the device or parts of the device caused by normal or natural wear or tear 

or by normal use of the device.

4. Your Product is guaranteed for a period of 12 months from the original date 

of purchase and is intended for DIY (Do It Yourself) use only. Warranty excludes 

consumable parts. Guarantee claims should be submitted before the end of the 

guarantee period within two weeks of the defect being noticed. No guarantee claims 

will be accepted after the end of the guarantee period. The original guarantee period 

remains applicable to the device even if repairs are carried out or parts are replaced. 

In such cases, the work performed or parts fitted will not result in an extension of the 

guarantee period, and no new guarantee will become active for the work performed or 

parts fitted. This also applies if an on-site service is used. 

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT 

TO THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts, consumables 

and missing parts as set out in the service information in these operating instructions.

CUSTOMER SERVICE  

HELPLINE 

GB: 0151 294 4488 

IRL: 1850 882711 

Ozito-diy.co.uk

OZITO UK

 

Champion’s Business Park, Unit 10, 1st Floor, Arrowe Brook Road, 

Upton, Wirral, Merseyside, CH49 0AB

Reviews: