1
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Strap fastening eyelet
2 Recoil starter
3 Spark plug boot
4 Choke lever
5 Air filter housing cover
6 Fuel tank
7 Throttle lock-off
8 Throttle lever
9 Ignition switch
10 Upper shaft
11 Forward handle
12 Shaft connecting piece
13 Shaft screw
14 Lower shaft
15 Fuel pump “primer”
16 Safety guard
17 Spool retainer screw
18 Spool
19 Line cutter blade
Assembly of the long handle
1. Remove the transport guard cap from
the lower shaft.
2. Carefully slide the lower shaft into the
connecting piece on the upper shaft.
When doing so, take care to ensure
that the drive shafts on the inside slide
into each other (turn the shafts gently,
if required) and that the lock on the
lower shaft latches securely into the
connecting piece.
3. Insert the shaft screw into the connecting piece
and tighten.
4. To dismantle, proceed in reverse order.
Fitting the safety guard
1. Slide the safety guard onto the
bottom of the lower shaft.
2. Screw the safety guard tightly in
position using the screw and locknut
supplied.
Line cutter protector
The line trimmer is fitted with a protection cover on the safety guard line
cutter. This cover must be removed before operating as the line will not
be trimmed to the correct length while it is still fitted.
KNOW YOUR PRODUCT
ASSEMBLY
1. ASSEMBLING THE TRIMMER
PETROL LINE TRIMMER
7
12
9
14
16
17
WARNING!
DO NOT START THE ENGINE UNTIL
THE LINE TRIMMER IS FULLY ASSEMBLED.
ACCESSORIES
20 Spark plug wrench
21 Open ended spanner
22 Fuel mixture bottle
23 Shoulder strap
24 Spool changing key
3
2
4
5
6
1
8
10
11
13
15
18
19
20
21
22
23
24